It is a kind of flame retardant halogen-free cable material, made of high-quality EVA, PE and other resins as the base materials, adding carbon-forming agents, antioxidants, lubricants, flame retardants, etc. by mixing and granulating. It could meet CPR regulations and GB 31247 standards. It has high flame retardant, halogen-free
environmental protection properties. It has peak heat release rate, low total heat release, and low total smoke release properties. It has excellent thermal shock no-cracking performance.
(Thermoplastic & Irradiation/E-beam & UV Irradiation) HFFR / LSZH |
| Thermoplastic |
| Product code | T046 |
| Standards | Test method | GB/T 32129-2005
GB/T 31247-2014 |
| Density (g/cm³) | ASTM D792 |
|
| Tensile trength (Mpa) | IEC 60811-1-1 | 11 |
| Elongation at break (%) | 180 |
| Thermal aging | ºC'h |
| 100*240 |
Tensile strength
variation(%) | 90 |
Breaking elongation
variation (%) | 91 |
| Thermal deformation @90ºC, 4H (%) |
|
|
| Thermal shock(150ºC'5kg'1h) |
| No cracking |
| Impact brittlenes (-25ºC) Failure(Piece) | IEC 60811-1-4 |
|
| Volume resistivity @20ºC (Ω·cm) | ASTM D257 | 1.0×10¹³ |
| Dielectric strength @20ºC (MV/m) |
| 24 |
| Smoke density | Flame |
| 70 |
| Flameless |
| 190 |
| Oxygen index (%) |
| 36 |
| Corosion test | pH |
| 5.5 |
Electrical conductivity
(μs/mm) |
| 2 |
| Halogen acid gas content (mg/g) |
| 0 |
-The data in the table are typical and should not be considered as specification limits or separately applied design data.
