These materials use superior quality polar resin, elastomer resin,rubber and grafting material as the base materials ,adding antioxidants, anti-ultraviolet agents, lubricants, flame retardants and other additives, mixed and granulated. They have excellent solvent resistance property; excellent flame retardant property and it can pass the single vertical combustion test (ISO 19642 standard); They have good tear resistance property and good long-term aging performance as well as excellent high temperature resistance property.
Standard: ISO6722
Application: Manufacture of high-voltage electrical system cables inside new energy vehicles such as pure electric, hybrid, and fuel cell.
Characteristic: Minimum controllable hardness≤80A
Property:
-The data in the table are typical and should not be considered as specification limits or separately applied design data.
Processing:
Recommend to use a conventional single screw extruder, low-smoke halogen-free professional screw for operation.
-The above temperature is for reference only. As the using conditions are not within our control, it is recommended that the user adjust according to the current at the time of extrusion, the melting pressure and the actual situation after the wire extrusion. This process proposal is not intended as terms of cooperation between the parties.
Product packing
Vacuum packing in aluminum foil bags. N.W: 25±0.05 kg/bag.
Customization
According to the different requirements of customers, we will provide customized services.
Note:
1. Confirm the package is not damaged before using and stop using if you find the particles are contaminated or discolored.
2. Transportation,stacking and storage should prevent sun, rain and water immersion, etc., the storage environment should be clean,dry,ventilated, and the storage temperature should not be lower than 0 ℃. For safety, please refer to the Material Safety Data Sheet.
3. After opening for a long time, it is necessary to dry with a dryer at a temperature of 65-70°℃ for 3-4 hours before using.
4. The best using period is within six months from the date of production.
