| Quantity: | |
|---|---|
These products are thermoplastic low-smoke halogen-free flame retardant polyolefin insulation materials or sheath materials. They are based on polyolefin as the matrix, adding inorganic flame retardants, compatibilizers, lubricants, antioxidants and other additives through continuous mixing and plasticization granulation. The production process is continuous. The materials have good extrusion processing performance, mechanical properties and stable & reliable flame retardant performance.
-The data in the table are typical and should not be considered as specification limits or separately applied design data.
Recommend to use a conventional single screw extruder, low-smoke halogen-free professional screw for operation.
-The above temperature is for reference only. As the using conditions are not within our control, it is recommended that the user adjust according to the current at the time of extrusion, the melting pressure and the actual situation after the wire extrusion. This process proposal is not intended as terms of cooperation between the parties.
Vacuum packing in aluminum foil bags. N.W: 25±0.05 kg/bag.
According to the different requirements of customers, we will provide customized services.
1. Confirm the package is not damaged before using and stop using if you find the particles are contaminated or discolored.
2. Transportation,stacking and storage should prevent sun, rain and water immersion, etc., the storage environment should be clean,dry,ventilated, and the storage temperature should not be lower than 0 ℃. For safety, please refer to the Material Safety Data Sheet.
3. After opening for a long time, it is necessary to dry with a dryer at a temperature of 65-70°℃ for 3-4 hours before using.
4. The best using period is within six months from the date of production.
